Vertical lathe in the single-column vertical lathe, its understanding and understanding, the following will be through a number of specific issues to start and carry out, and give the corresponding answer, so that we can have a thorough understanding, and a correct understanding , And will not form a wrong concept, and thus, affect the use of the product, as well as its use and use value.

1. Vertical lathe in a single column vertical lathe, which is mainly used to carry out what processing? What is the spindle of its workstations?

Vertical lathes in single-column vertical lathes, which are mainly used for some machining, and are available for various industries. Specifically, it is for the inside and outside the cylindrical surface, inside and outside the conical surface and the end of the rough and finishing. Its table spindle, is the use of radial clearance adjustable double row of short cylindrical roller bearings, in order to have a good processing effect.

2. Single-column vertical lathe can not speed, what is the reason?

If the single-column vertical lathe can not speed, then, the specific reason is that there are many, for example, equipment mechanical problems, the lock bar limit switch problems. Or, there is a problem with the oil pressure in the lathe, so it is necessary to troubleshoot the problem, so that the real cause can be found, so as to effectively and completely solve the problem, so that the problem can be avoided again.

3.CK516-1 single column vertical lathe, its specific parameters, which is mainly what?

CK516-1 single column vertical lathe, which is one of the single column vertical lathe models, and it is only one column. In its specific parameters, it is for the processing of parts size limit, processing height and so on. Also, its small pallets are moved vertically, while the big pallet is also moved vertically up and down. And the carriage, which is about horizontal movement. So, know these, you can come to a good use, to achieve the desired processing effect.